To connect your printer to Wi-Fi:

1. Turn on your printer and navigate to the wireless settings menu.
2. Select your Wi-Fi network from the list and enter the password.
3. Follow the on-screen instructions to complete the connection.
   If your printer doesn’t have a screen, use the Wi-Fi Protected Setup (WPS) button or refer to your printer’s manual for alternative methods.

This usually happens due to connectivity or software issues. Try these steps:

1. Check if the printer is turned on and connected to the same network as your device.
2. Ensure the printer is set as the default in your computer’s settings.
3. Restart your printer and device.
4. Reinstall the printer drivers if the issue persists.

To bypass cartridge errors:

1. Check if the cartridges are properly installed and compatible with your printer.
2. Clean the cartridge contacts gently with a lint-free cloth.
3. Reset your printer by turning it off, unplugging it for a few minutes, and then restarting it.
4. Disable firmware updates to prevent cartridge lock issues, if applicable.

Some common printer errors include:

• Paper Jams: Caused by improperly loaded paper or debris in the tray.
• Low Ink/Toner Alerts: Often resolved by replacing or refilling cartridges.
• Driver Issues: Fixed by updating or reinstalling the printer drivers.
• Connection Errors: Ensure proper Wi-Fi or cable setup.

To connect your phone to a printer:

1. Ensure both devices are on the same Wi-Fi network.
2. Install a compatible printing app or use your phone’s built-in printing feature.
3. Select the document or image, tap the share or print option, and choose your printer from the list.